Walk into most Ottawa houses built in the last 30 years and you'll find it by the front door. Four, five, sometimes six switches in a row. Nobody remembers which one does the porch light. Guests flip three of them before they find the hallway.
A good keypad fixes that. One plate, a few buttons, each one labelled in plain words. Lutron's Palladiom is the keypad we reach for when the controls have to look as good as the rest of the room. Here's what goes into picking one, from the finish to the words on the buttons.
What a Palladiom keypad is
Palladiom is Lutron's architectural keypad. The faceplate and the buttons are made from the same material, so it reads as one flat, clean piece on the wall. The faceplate snaps on with no screws showing. The engraving on each button is backlit in white, so you can read it in a dark hallway at 6 AM in January.
It's a wired, low voltage keypad. It talks to a Lutron HomeWorks processor over a cable Lutron calls the QS link. It doesn't carry power to your lights. It sends a command and the system does the rest, which is how one small plate can run a dozen lights and the shades at once.
One spec matters here. Lutron rates it for indoor use between 0 and 40°C. An unheated Ottawa garage or a three-season porch is the wrong spot. Put it just inside the heated door instead.
